ADAPT ems remains at the cutting edge of technology with the first installation in the UK of two Mycronic Mycronic MYPro A40DX-17 pick-and-place machines and two Mirtec MV6 OMNI 3D Component AOI systems.
ADAPT ems has 6 SMT lines across two sites, including a high speed line based around 4 x IPulse pick-and-place machines and 2 SMT lines based around the new Mycronic MYPro A40DX-17 pick-and-place machines. In fact, as is typical for ADAPT ems this is the first installation of these machines in the UK. This gives ADAPT ems and a huge amount of SMT capacity and flexibility to cope efficiently with prototyping, low volume and high volume production requirements.
We have both standard hot air reflow and Vapour Phase reflow ovens so there is no need to compromise on product quality due to process restrictions. Whilst our hot air reflow ovens are extremely capable there are some jobs that due to their design (usually where there is a high thermal mass as a result of heavy copper layers and/or extremely large components) where Vapour Phase is really the only option. Both Hitchin and St.Neots have both process
Supporting our state-of-the-art SMT pick and place machines we also have in line 3D inspection processes covering both Solder Paste Inspection (SPI) and Component Automatic Optical Inspection (AOI), in fact again ADAPT ems is leading the pack by installing the first two Mirtec MV6 OMNI 3D Component AOI machines in the UK.
Supporting our state-of-the-art SMT pick and place machines we also have in line 3D inspection processes covering both Solder Paste Inspection (SPI) and Component Automatic Optical Inspection (AOI), in fact again ADAPT ems is leading the pack by installing the first two Mirtec MV6 OMNI 3D Component AOI machines in the UK.
| 2D Mode | Camera System | 15MP / 25MP CoaXPress Camera System |
| Coverage | Missing Component, Wrong Component, Mis-Alignment, Skewed Component, Polarity, Tombstone, Solder Bridge, Flipped Device, Solder Ball, Etc. | |
| 3D Mode | Camera System | Digital Tri-Frequency Moiré Technology – 12 Projection Blue DLP |
| Coverage | Component Height ±3 um, Position, Lifted Package, Lifted Lead, Solder Fillet, Excessive Solder, Insufficient Solder, Solder Bridge, Open Solder, Etc. |
ADAPT ems also employ 3D Solder paste inspection tools. This inspection system is based on dual projection camera system to ensure shadow free Moiré phase to check shape, height and area (volume) of each solder deposition. Solder Paste alignment can also be checked across a panel which is a particular importance on panelised double-sided boards which can exhibit thermal expansion during processing.
| 2D Mode | Camera System | 4MP CameraLink / 15MP CoaXPress Camera System |
| Coverage | Solar Bridge, X/Y Offset, Shape Deformity, etc | |
| 3D Mode | Camera System | Dual Projection Shadow Free Moiré Phase Step Image Processing |
| Coverage | Solder Deposition: Height, Volume / Area, Solder Bridge, X/Y Offset, Shape deformity, etc |
END-TO-END MANUFACTURING
Prototype To Production
100% Quality And Reliability
Technical Manufacturing Expertise
Collaborative Working
We build long term strategic relationships with our customers; ultimately supporting them with a one stop manufacturing solution.
We aim to develop & maintain a reputation as the CEM of choice for all our stakeholders.
